Pls. Help Me?!?!?!
I have a PS2 SCPH-70004 Slim modded with Modbo 4.0 clone and modified with HDD connectivity. With MB# GH-032-13 / GH-035-13 not so sure. The problem goes like this when pressing the reset button the light turn to green from standby, but no video on the TV or even audio from booting up with Modbo. So i suspected that the modbo chip has the problem. So i desoldered the wires and removed the modbo chips from the console MB. After doing it, i must have the NORMAL PS2 Boot/Browser with audio if i press the reset or power it ON, but what i see i a flicker then black screen without sound of ps2 booting. After having it ON without a video and sound for 30sec, it automatically display the NORMAL PS2 Boot up with sound and goes into Browser. But when i try to press the reset again, still i have to wait for 30sec to display or have a normal SONY PLAYSTATION SCREEN Booting up with sound 'till the browser. I now come out the idea of having a cold solder points, but i already reflow the CXM Chips or video driver/decoder/etc chip bottom of the MB. but still same result.
- Can anybody give me advise what to do?
- Have any ideas regarding this problem?
- Experience the same problem and solution?
- Is there any components/IC/chips faulty, resulted this way?
- What components/IC/chips to be replaced or resolder?
Please help me?
Thank you very much,
Roy Reglan A. Arnaiz
roy_reglan@yahoo.com
Iligan City, Philippines
Linear Mode
